User guide

2. Select a Preset number you wish to set (Preset 1 – 6) by
tapping the Channel “B” button until the desired Preset is
heard.
3. Find an FM station to save using Seek or Scan (see 8.2 RADIO
TUNING).
8.2 RADIO TUNING
Seek and Save: (Find the next FM station)
1. Press and hold the Volume Up or Volume Down Button for
2 seconds.
• Pressing Volume Up searches upwards (higher frequency) for
a station
• Pressing Volume Down searches downwards (lower
frequency) for a station
2. Tap the Channel “B” button within 20 seconds of nding the
FM station to save it as the current Preset.
Scan and Save: Scan through FM stations
1. Press and hold the Volume Up button for 5 seconds. The G9
will search upwards (higher frequency) for a station. When a
station is found, it can be heard for a few seconds.
2. To stop the scan on this station: Tap the Volume Up Button.
3. Tap the Channel “B” button within 20 seconds of nding the
FM station to save it as the current Preset.
4. To continue scan: Wait for the next station to be found.
NOTE: During Scan, tap the Channel “B” button to Fast Save the
current FM station as the current Preset
8.3 AUTOMATIC RADIO TUNING
This feature makes nding new stations fast and easy by automatically
creating a temporary list of 6 “on-the-go” radio stations.
1. Turn on the Radio.
2. Press and hold the Volume Down button for 5 seconds.
3. Your G9 will search upwards (higher frequency) from the
current station and store the next 6 FM stations it discovers as
“on the go” stations.
4. If desired, repeat from Step 2 to store the next 6 FM stations as
“on the go” stations.
NOTE: These 6 temporary “on the go” stations cannot be saved
and do not replace the FM Presets you may have saved.
Turning o your G9 will clear the Automatic Radio Tuning stations
and restore the FM Presets.
8.4 RDS ALTERNATIVE FREQUENCIES
This feature allows your G9 to automatically re-tune to the
strongest frequency available for the FM station you are listening
to when the rst signal becomes too weak.
Toggle RDS On/O
(Default: O)
1. Turn on Radio.
2. Press and hold Volume Up and Volume Down buttons
simultaneously for 2 seconds.
English
scala rider
®
G9 / G9 PowerSet | 23 scala rider
®
G9 / G9 PowerSet | 23