User guide

7. PAIRING AND USING A MOBIlE PHONE,
GPS OR MP3 PlAYER
To connect your scala rider G9 to a Bluetooth device you must
rst pair them. Pairing is a one-time process. Once paired, the
Bluetooth device and the scala rider G9 will automatically
recognize each other whenever they are within range (10m / 33ft).
Your scala rider G9 oers Multiple Device Connectivity (“MDC”) :
➤ Intercom with up to 10 other scala rider G9 units (Rider A,
Rider B, and “One+8” Buddies)
➤ Bluetooth Mobile Phone / GPS device
➤ Bluetooth A2DP Music Player
7.1 MOBILE PHONE
• Make and receive calls
• Listen to Music via A2DP (with compatible phones)
7.1a PAIRING A MOBILE PHONE
If using both a Bluetooth GPS and Mobile Phone, pair the mobile
phone to the GPS device. See Section 7.2
1. Turn on your mobile phone and make sure the Bluetooth
function is activated.
2. Verify that the scala rider G9 is turned ON and in Standby
mode. (single BLUE ash every 3 seconds).
3. Press and hold the Mobile Button for at least 6 seconds. The
G9 will rst ash RED. Continue to hold the button until the
RED and BLUE lights begin rapidly alternating.
4. Search for Bluetooth devices on your phone by following the
phone’s instructions. Consult your phone’s User Manual for
more information.
5. After a few seconds the phone will list “scala rider G9” as a
discovered device. Select “scala rider G9” from the list.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The phone will conrm that pairing has succeeded and the
scala rider G9
will begin ashing slowly in BLUE.
NOTES:
• If Pairing is not completed within 2 minutes, the scala rider G9 will
return to Standby mode.
• Not all Bluetooth mobile phones can broadcast Bluetooth Stereo
music (A2DP), even if the phone has an MP3 player function. Consult
your mobile phone’s User Manual for more information.
• After pairing, you may need to tap the Mobile Button to connect the
scala rider G9
to the phone.
7.1b MAKING AND RECEIVING PHONE CALLS
BASIC FUNCTIONS
Answer a call Tap the Mobile Button or speak any word
loudly to answer by VOX
Reject a call Remain silent for 15 seconds, or press and
hold the Mobile Button for 2 seconds
End a call Tap the Mobile Button
Voice Dial* (if supported
by mobile phone)
Tap the Mobile Button and follow the
prompt from the mobile
Redial* Tap the Mobile Button twice
INTERCOM CONFERENCE MODE
Add/Remove Channel
“A” to/from a call
Tap the Channel “A” button while on a
phone call
Add/Remove Channel
“B” to/from a call
Tap the Channel “B” button while on a
phone call
*This feature is not available during intercom or mobile calls
20 | scala rider
®
G9 / G9 PowerSet 20 | scala rider
®
G9 / G9 PowerSet