User guide

6.2 MAKING 3WAY INTERCOM CALLS
To start an Intercom Conference Call with Channel “A” and “B”:
OPTION 1: Voice Connect VOX
1. Speak any word loudly into the microphone to open the
Intercom channel.
2. When you hear the Voice Command tone, say: “Call Intercom”
to make an intercom call with Rider A and Rider B.
☛
OPTION 2: Manual Mode
1. Add Channel “A”: Tap the Channel “A” Button
2. Add Channel “B”: Tap the Channel “B” Button
If you are already in an Intercom Call with Rider A or B, you can add
another rider (A or B) by tapping the respective button, or another
rider can join the intercom call in the same way.
To end Intercom Call press the respective Channel “A” or “B” Button.
NOTE: 3 and 4-way intercom calls can only be made using Channel
“A” and Channel “B”.
6.3 MAKING 4WAY INTERCOM CALLS
Once you have successfully paired the four G9s as described in
5.2c. proceed as follows:
1. Make sure all four G9s are in Standby mode.
2. Passenger 2 should tap Button “B” to initiate an Intercom call
with Passenger 4. Wait until audio is heard on both G9s.
3. Rider 1 should tap Button “A” to initiate an Intercom call with
Passenger 2.
4. Rider 3 should tap Button “A” to initiate an Intercom call with
Passenger 4.
Now the 4-way Intercom conference mode is established.
6.4 USING CLICKTOLINK INTERCOM
If you want to… Perform this action:
Make
Click-to-Link
calls
Start a Click-to-Link call
request
(search lasts up to 10
seconds)
Double tap the Channel“A”
Button
End a Click-to-Link call /
Cancel a Click-to-Link call
request
Tap the Channel “A” Button
Receive
Click-to-Link
calls
Accept a Click-to-Link call When hearing the
Click-to-Link ringtone:
Tap the Channel “A” Button
or Speak any word loudly
to answer by VOX
Reject a Click-to-Link call While hearing the
Click-to-Link ringtone:
Remain silent until the ring
tone stops
If other scala rider users are nearby, your next Click-to-Link call
may randomly connect to any of them.
18 | scala rider
®
G9 / G9 PowerSet 18 | scala rider
®
G9 / G9 PowerSet