User guide

5.2c FOUR WAY INTERCOM

To set up four-way intercom conference mode proceed as

follows:

In this conguration the two passengers (numbered 2 and 4) are

each using two Bluetooth connections:

Passenger 2 is paired to Rider 1 and to Passenger 4

Passenger 4 is paired to Rider 3 and to Passenger 2

PAIRING FOUR SCALA RIDER G9 UNITS

1. Pair Rider 1 to Passenger 2 using Channel “A” (see section 5.2a).

2. Pair Rider 3 to Passenger 4 using Channel “A” (see section 5.2a).

3. Pair Passenger 2 to Passenger 4 using Channel “B” (see

section 5.2a).

The Four-Way Pairing is complete and ready to use.

IMPORTANT: Four-Way Conference Mode Considerations

During a 4-Way Intercom call, the two passengers who maintain two

active connections simultaneously will not be able to receive mobile

phone calls or GPS instructions as long as the conference call is in

progress.

5.3 CLICKTOLINK INTERCOM MODE

Click-to-Link is a spontaneous, “social” feature of your G9.

Use Click-to-Link to instantly initiate 1-on-1 intercom calls

with other scala rider users near you, without those users

already being paired to you. Think of it as a private Bike-to-Bike

channel that you can set up on-the-go with other scala rider G9 or

G4 users that you see along the way.

The Click-to-Link feature can be disabled on your G9 eectively blocking

any attempt by a third party to send a Click-to-Link request to you.

ENABLE/DISABLE CLICKTOLINK

The feature can be turned on or o via the Voice Menu (see

Section 4.7)

NOTE: By default, Click-to-Link is DISABLED.

| scala rider

G9 / G9 PowerSet

| scala rider

G9 / G9 PowerSet