User guide

ManualsBrandsCardo Systems Manualscomputers & electronicsG9 Powerset

Intercom Compatibility

Your scala rider G9 is compatible with all scala rider intercom

models for intercom calls. In addition, it is also compatible with

the Schuberth SRC-System™. Intercom range with other models is

limited to the distance of the device with the shorter range.

For instructions on how to pair and use your scala rider G9 with

other scala rider models, please visit

www.cardosystems.com/compatibility.

5.1 “ONE+8” INTERCOM TOGGLING MODE

Pair with up to 8 other G9 devices (“One+8” Buddies) and

connect with one at a time by pronouncing their name.

5.1a CONFIGURING YOUR G9 BUDDY NAME

“One+8” Intercom Toggling allows you to connect to a “One+8”

Buddy by simply saying the Buddy Name they assigned to their G9.

IMPORTANT! Before using “One+8” Intercom, you should assign

your G9 device(s) a Buddy Name, so that other “One+8” participants

can call you by this name.

If you change your G9 Buddy Name, you must Flash Pair again with

your “One+8” Buddies for their G9 to receive your new Buddy Name.

Visit the Cardo Community platform

http://community.cardosystems.com to assign your G9

device’s Buddy Name using your PC. See Section 3 for more

details.

Until you assign a Buddy Name to your G9, it will be known by

its generic “One+8” Buddy name, “scala rider”.

“One+8” Intercom Buddies will be able to connect to your G9 by

manually choosing your G9 from their “One+8” Intercom Buddy

List (see Section 6.1: Option 2: Manual Mode).

5.1b HEARING YOUR ASSIGNED NAME

To hear the name you have chosen for your G9:

1. Start with the G9 in Standby mode.

2. Simultaneously tap the Voice Command and Channel “B” buttons.

3. You will hear the Buddy name of your G9 through the speakers.

5.1c PAIRING WITH A “ONE+8” INTERCOM BUDDY

Flash-Pairing™

Use Flash-Pairing to add a new “One+8” Buddy within

seconds.

1. Remove both G9 units from their Audio Kits and check they

are in Standby Mode (slow single blue ashing).

2. Bump the two G9 units gently against each other and hold

them side by side.

CLICK !KLICK!

3. If Flash-Pairing was successful, a purple light appears for

2 seconds.

NOTE: If your scala rider G9 already has a full list of 8 paired

“One+8” Intercom Buddies, pairing another buddy will replace the

buddy that you have not spoken to for the longest time.

English

scala rider

G9 / G9 PowerSet |

scala rider

G9 / G9 PowerSet |