Owner`s manual

Cybex Arc Trainer 625A/625AT Owner’s Manual
43
3. Plug the USB stick into the USB port of the MCC board.
Console
USB Port
MCC Board
4. Press and hold Scan/Hold and TV Up for 3 seconds.
5. Press Down to navigate to “Cloning”. The console will display “SAVE [FILE] [ on ] [USB]”
6. Press Enter to save settings to USB stick. Console will beep four times when complete.
7. Press Pause and remove USB stick.
8. Install the back cover with four screws using a Phillips screwdriver.
Transfer settings to another unit
1. Remove the four screws from the back cover using a Phillips screwdriver.
Back
Cover
Screws (4)
2. Remove back cover.