Owner`s manual

Cybex Arc Trainer 625A/625AT Owner’s Manual Cybex Arc Trainer 625A/625AT Owner’s Manual
42
To reset setup options to default values
1. Press the SCAN/HOLD key at the rst setup option screen (Time). The console will
display “RESET” and “[dEFA] [ULtS] [? ]“.
To exit without resetting, press the UP and DOWN keys or the ENTER key.
2. Press the SCAN/HOLD key to reset the console to the default values. The console will
beep twice and display “RESET” and “[dEFA] [ULtS] [Set]“.
Exit Set Up Mode.
1. Press the Pause key to exit Setup options.
Transfer settings to other units (optional)
After completing setup on one unit the settings can be loaded to other units. Settings can ONLY be
transferred between 625A/625AT Arc Trainers. Do NOT transfer settings between other Arc Trainers,
Bikes or Treadmills.
Tools Required
• Phillips screwdriver
• Cybex USB stick, (Not included). Ensure USB stick is blank.
Save settings to USB stick
1. Remove the four screws from the back cover using a Phillips screwdriver.
Back
Cover
Screws (4)
2. Remove back cover.