Owner`s manual
Cybex Arc Trainer 625A/625AT Owner’s Manual
41
Setup
Use the following instructions to setup the units settings.
1. Plug the optional power cord into a power outlet from a grounded circuit, See Electrical
Requirements. Coil up the remainder of the power cord and place it out of the way. The
control panel will light up and be in the Dormant Mode.
2. Hold the handrails to steady self while stepping into the foot plates.
3. Begin striding.
Setup options
1. Press and the hold the SCAN/HOLD and UP keys for 3 seconds.
Navigate through the setup menu with the UP and DOWN keys.
Press the ENTER key once to enter setup values. Press again to save any changes and
advance forward in the menu.
The Setup options are:
Time Set time display format. 12Hr A, 12Hr P or 24Hr (12 Hour AM, 12 Hour PM or
24 Hour).
Date Date format is [YYYY] [MM] [DD]. Y - Year, M - Month and D - Day.
Distance Units MI - Miles or KM - Kilometers.
Weight Units LBS - Pounds, KG - Kilograms or Stone - Stones.
Pause Set time length for Pause. OFF (Default), 0:30, 1:00 or 2:00 minutes.
Default Time Set default workout time. 10, 20, 30 (Default), 60 or 90 minutes.
Max Time Set maximum workout time. OFF (Unlimited), 20, 30, 40, 50, 60 (Default), 90
or 120 minutes.
Tone Toggle console beeper On (Default) or OFF.
Dormant Style Default, Default with time (Clock shown), Heart only or Energy Saver (All
LED’s off except for center dashes on membrane.
A/V Set A/V option. none (Default), “UHF” or “FM”. See A/V Cong and FM Radio
Presets for full conguration. If unit ships with embedded PEM this setup
option is skipped.
Cloning Transfer setup settings from one unit to others. See Transfer settngs to other
units (optional).