Owner`s manual

Cybex Arc Trainer 625A/625AT Owner’s Manual Cybex Arc Trainer 625A/625AT Owner’s Manual
34
Remove left and right handle assembly
The left and right handle assemblies are shipped in the reverse positions. The handle assemblies
must be removed and swapped for proper setup and assembly.
Shipping
Position
Right
Handle
Assembly
Left
Handle
Assembly
1. Remove a screw and washer from the right handle assembly using two 7/32” Allen wrenches.
Right
Handle
Washer
Pivot Pin Assembly
Screw
2. Slide pivot pin assembly out, remove right handle assembly and set aside.
3. Remove a screw and washer from the left handle assembly using two 7/32” Allen wrenches.
Left
Handle
Washer
Screw
Pivot Pin Assembly
4. Slide pivot pin assembly out, remove left handle assembly and set aside.