Owner`s manual

Cybex Arc Trainer 625A/625AT Owner’s Manual

625AT Assembly

The words “left” and “right” denote the user’s orientation.

Read and understand all instructions thoroughly before assembling this unit. Check all items

carefully. If there is damage, see the Customer Service section of this manual for proper procedure to

return, replace, or reorder parts.

Verify correct package

1. Read box label to verify the model number and voltage (optional) match what was ordered.

2. Lift and remove cardboard sleeve surrounding unit.

3. Verify paint color matches what was ordered.

Tools Required

• Phillips screwdriver

• Stubby Phillips screwdriver

• 3/16” Allen wrench (supplied)

• 7/32” Allen wrench (2) (supplied)

• 9/16” Open end wrench (2)

Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the

equipment to ensure that there is appropriate clearance around each machine to allow for safe use

and passage.

Unpack and verify contents of carton

See content listing and diagram below for carton contents. See Customer Service for contact

information if any parts are missing.

Item Quantity Part Number Description

1 1 Varies Base with covers attached

2 1 Varies Console assembly

3 2 12090-322 Foot pad

4 1 770A-316 Base, Accessory tray

5 1 770A-317 Cover, Top, Accessory tray

6 1 770A-318 Cover, Bottom, Accessory tray

7 1 625A-312 Cover, Rear, Top, Right

8 1 625A-313 Cover, Rear, Outer, Right

9 1 770A-324 Cover, Rear, Inner, Right

10 1 625A-310 Cover, Rear, Top, Left

11 1 770A-321 Cover, Rear, Inner, Left

12 1 625A-311 Cover, Rear, Outer, Left

13 1 NA Hardware pack

14 1 5625-4 Owner’s Manual

15 1 625AT-300 Assembly poster