Owner`s manual

Cybex Owner’s Manual
64
Check the running belt condition.
1. Using a Phillips screwdriver, remove the two screws securing the right end cap.
2
1
1 Screws (2)
2 Right end cap
2. Repeat step 1 for the left end cap.
3. Look at the top surface, seam and edges of the running belt while you roll it by hand. If the belt
has any rips or looks excessively worn the belt needs to be replaced.
If the running belt and deck need replacement refer to a qualied service technician.
4. Using a Phillips screwdriver, install the screws securing the end caps removed in steps 1
and 2.
Other Preventive Maintenance
Other preventive maintenance activities must be completed by a qualied service technician at the
recommended intervals listed in the Service Schedule at the end of this chapter. These activities
include:
• Flipping or replacing the running deck
• Replacing the running belt
Elevation Motor Lubrication — In time the elevation motor pivot points or tube nut may develop a
squeak. Lubricate the upper and lower bolts and the spacers with a small amount of lithium grease.
You can buy lithium grease at an auto parts store.
Static Electricity — Depending upon where you live, you may experience dry air, causing a
common experience of static electricity. This may be especially true in the winter time. You may
notice a static build-up just by walking across a carpet and then touching a metal object. The same
can hold true while working out on your treadmill. You may experience a shock due to the build-
up of static electricity on your body and the discharge path of the treadmill. If you experience this
type of situation, you may want to increase the humidity to a comfortable level through the use of a
humidier.