Owner`s manual
Table Of Contents
- Table of Contents
- FCC Compliance Information
- Safety
- Assembly
- Operation
- Terms Used
- User Control Symbols Used
- Console Display
- User Controls - Membrane with Progams key
- User Controls - Membrane with Workouts key
- Quick Operation Guide
- Detailed Operation Guide
- Stopping the Treadmill
- Safety Sentry
- Data Readouts
- Heart Rate Indicator
- Meaning of % Grade
- E3 View Monitor Display Options
- iPod Functions
- Maintenance
- Customer Service
- Appendix - Workout Overviews
Cybex Owner’s Manual
32
Membrane with Workouts key
1 2 3 4 5 6
8 109 11 127
1 Incline keys Navigates through all stored channels as in User Mode
2 Incline display Shows setting of receiver sensitivity as (n)ear or (F)ar
3 Quick Start key Selects transmitter type Resets all stored TV channels when used
4 Workouts key Toggles setup for FM presets and back to TV channel setup
5 Speed display Shows ‘FM’ when storing FM radio station presets
6 Speed keys Toggles the display for Adding new channels or Deleting stored
channels
7 Volume keys Increase or decrease volume
8 Display option key Scans for available TV transmitters, or will seek the next strongest
FM station or FM transmitter frequency
9 STOP key Stores and exits setup
10 Setup key When storing FM presets, this button will clear all stored FM radio
presets
11 Enter key Enters menu, accepts value shown, moves forward in menu
12 Up/Down keys Navigates TV channels or manually tunes FM frequencies
A/V setup mode
WARNING: Falling hazard.
When starting unit
• Stand on two top steps.
• Do not stand on belt.
1. Plug the power cord into a power outlet from a grounded, dedicated circuit as described under
Electrical Requirements in this chapter. Do not stand on treadmill during this procedure.
2. Ensure the power cord is not being pinched under the front of the treadmill.
3. Toggle the power switch on (|). Power switch is located under the front end of the treadmill.
The control panel will light up and be in the Dormant Mode.