Owner`s manual
Table Of Contents
- Table of Contents
- FCC Compliance Information
- Safety
- Assembly
- Operation
- Terms Used
- User Control Symbols Used
- Console Display
- User Controls - Membrane with Progams key
- User Controls - Membrane with Workouts key
- Quick Operation Guide
- Detailed Operation Guide
- Stopping the Treadmill
- Safety Sentry
- Data Readouts
- Heart Rate Indicator
- Meaning of % Grade
- E3 View Monitor Display Options
- iPod Functions
- Maintenance
- Customer Service
- Appendix - Workout Overviews
Cybex Owner’s Manual
24
2. Unthread the nut at the end of the A/V cable.
1
2
Item Description
1 A/V cable
2 Nut
3. Insert the A/V cable into the D-shaped hole in the mounting plate on the front of the unit.
5
6
3
4
1
2
Item Description
1 A/V cable hole
2 6 CSAFE coupler
3 Nut
4 Mounting plate
5 A/V cable
6 CSAFE cable, Red
4. Thread the nut removed in step 2 onto the A/V cable by hand.
5. Install the A/V cable to the mounting plate on the front of the unit using a 14 mm open end
wrench.
6. Plug the CSAFE cable into the CSAFE coupler on the front of the unit.
Install shield.
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
2
3
1
Item Description
1 Base
2 Screws (7)
3 Shield