Owner`s manual
Table Of Contents
- Table of Contents
- FCC Compliance Information
- Safety
- Assembly
- Operation
- Terms Used
- User Control Symbols Used
- Console Display
- User Controls - Membrane with Progams key
- User Controls - Membrane with Workouts key
- Quick Operation Guide
- Detailed Operation Guide
- Stopping the Treadmill
- Safety Sentry
- Data Readouts
- Heart Rate Indicator
- Meaning of % Grade
- E3 View Monitor Display Options
- iPod Functions
- Maintenance
- Customer Service
- Appendix - Workout Overviews
Cybex Owner’s Manual
23
Connect the Display Cable
The display cable and CSAFE cable have the same connectors. The display cable is black, the
CSAFE cable is red.
1. Route the cables under all other cables and towards the base plate.
2. Plug the display cable, located at the bottom of the upright assembly into the communication
port of the controller.
3
4
5
2
1
Item Description
1 Controller
2 Communication port
3 Display cable, Black
4 CSAFE cable, Red (optional)
5 Coax cable (optional)
Install optional A/V or CSAFE cables
1. Insert the CSAFE coupler into the mounting plate by hooking the lower tab into the mounting
plate and snapping in the upper tab.
2
1
4
3
5
6
Item Description
1 Upper tab
2 Mounting plate
3 6 CSAFE coupler
4 Lower tab
5 Installed
6 Front of unit