Owner`s manual
Table Of Contents
- Table of Contents
- FCC Compliance Information
- Safety
- Assembly
- Operation
- Terms Used
- User Control Symbols Used
- Console Display
- User Controls - Membrane with Progams key
- User Controls - Membrane with Workouts key
- Quick Operation Guide
- Detailed Operation Guide
- Stopping the Treadmill
- Safety Sentry
- Data Readouts
- Heart Rate Indicator
- Meaning of % Grade
- E3 View Monitor Display Options
- iPod Functions
- Maintenance
- Customer Service
- Appendix - Workout Overviews
Cybex Owner’s Manual
18
Install power cord.
Decide whether you will plug the power cord into a power outlet near the front of the treadmill or the
back of the treadmill. Follow the corresponding routing procedure below. Do not plug the power cord
into a power outlet at this time.
WARNING: Shock and electrocution hazard.
• Route power cord so it does not become damaged.
• Do not allow cord to be pinched or interfere with movement of treadmill.
Front routing: Skip to Install the uprights procedure.
Back routing:
Remove front cover.
1. Remove the four screws securing the front cover to the base using a Philips screwdriver.
2
1
Item Description
1 Front cover
2 Screws (4)
2. Remove front cover.
3. Remove the two screws securing the right end cap using a Phillips screwdriver.
2
1
Item Description
1 Screws (2)
2 Right end cap