Specifications

11
DO’S AND DON’TS, Cont.
7. DO use only high quality Alkaline “C” size replacement batteries.
8. DON’T use sharp objects to press the keys. Use only your finger tip.
9. DO check scale calibration regularly to ensure that the high degree of weighing accuracy is
maintained.
10.DON’T modify or replace the loading hook or hanging eye with lower capacity parts.
11.DO remove loads which produce the over capacity (-oC- ) display as soon as possible.
IN CASE OF DIFFICULTY
Your HSDC hanging scale has been designed to provide years of trouble free service. Should you
encounter a problem with your scale refer to the chart below before contacting your scale
technician.
Problem Possible Cause/Solution
1. Scale seems dead A. Batteries improperly installed, make certain each of the six batteries
is correctly installed.
No display B. Batteries are discharged completely, replace with fresh batteries.
2. Incorrect weight A. Scale not at zero prior to applying weight, remove load and reset
display to zero by pressing ON/ZERO key.
B. Scale is not calibrated. Refer to Calibration Section of this manual.
C. Scale in net mode. Press the GROSS key.
If you are unable to resolve the difficulty, contact the Cardinal Scale representive from whom you
purchased the scale. He will be able to provide you with information concerning the return and
repair of your scale. Make certain that you obtain a return authorization number prior to returning
the scale. This number should appear on the shipping carton and all correspondence referencing
the repair. Failure to obtain a return authorization number will result in unnecessary delay.