Specifications
4
+%9&5.#4)/.3#ONT
Pressing the :%2/key will rezero the weight display or when displaying the
accumulator total, zero the accumulator.
Operator presses 4)-%$!4%key and is prompted for ;42<5 (sell by date).
Date is displayed in total price window as it is keyed. %.4%2key ends entry.
NOTE! Sell By Date must be re-entered whenever power has been interrupted.
This key is also used to enter the system clock mode to program the time, date
and year. Press the &Nkey, then the 4)-%$!4%key to set or change the
scale clock. The display will change to #.1?, the prompt to enter the minutes.
Tare can be subtracted by placing a container on the scale and pressing 4!2%
or by keying in a known tare (container) weight on the keypad and pressing
4!2%when the unloaded scale is at true zero.
Pressing the 02%0!#+key after unit price is entered retains the unit price for
repetitive price-computing. Tare entries are retained in PREPACK mode.
This key is used to print labels when the scale is connected to a label printer.
When in Prepack operation, it is used to print a label and add to the total price
accumulator.
Press the 0,5key and the unit price display shows %917? the request to enter a
price lookup number. As the number is keyed, it is displayed in the total price
window. After the PLU number has been entered, press the %.4%2key. The
recalled PLU description and unit price will display and operations will return to
normal. Refer to the 02)#%,//+500,53%450section of this manual for
programming price lookups.
The through numeric keys are used to enter numeric
data during the setup and calibration as well as during
normal operation of the scale. NOTE! The and keys
have dual functions. They are used to enter numeric data
during setup and calibration as well as during normal
operations and are also used to select yes or no (1 = YES,
0 = NO) to various prompts.
Pressing the %.4%2!##5-key when weight display is
zero will cause the instrument to display the current
contents of the accumulator (the number of pieces
accumulated and total price since the last time the
accumulator was zeroed). The maximum value of the
accumulator is 9999.99.
The #,%!2 key is used to clear an incorrect entry from the display without processing the
data. Pressing the #,%!2key cancels a unit price entry, cancels the PREPACK mode or
clears an incorrect or unacceptable known tare entry. If an incorrect entry is made, press the
#,%!2 key and re-enter the correct data. NOTE! The #,%!2 key must be pressed before
the %.4%2key to ensure the data is not processed.