Specifications
23
0#3%2)%3).4%2&!#%#!",%3
The PC series scale can be interfaced to different Detecto printers as well as to a host
computer. The following table lists the model numbers of the printers supported and the cable
required to connect to them or to a host computer.
0#3ERIES)NTERFACE#ABLES
0RINTER-ODEL.UMBER #ARDINAL0.
P200 6980-1047
P220/P240 8529-B304-0A
HOST (computer 9-pin) 8529-B305-0A
./4% Using nControl, serial printers from other manufacturers may be used with the PC
series scale. Some printers may work using one of the above listed standard cables, others
may require a custom built cable. It is the responsibility of the purchaser to insure that the
custom built cable is correctly wired. Refer to the printer manufacturer’s owner’s manual and
the following illustration to determine the correct cable configuration.
3ERIAL$ATA/UTPUT#ONNECTOR
Pin 1 ...................... N.C. (no connection)
Pin 2 ...................... GROUND
Pin 3 ...................... TXD (transmit)
Pin 4 ...................... RXD (receive)
Pin 5 ...................... DSR(data set ready)
Pin 6 ...................... N.C. (no connection)
#!2%!.$-!).4%.!.#%
1. DO NOT subject the commodity tray to sudden shocks.
2. DO NOT submerge the scale in water or spray water directly on the scale. The scale
may be cleaned using a damp soft cloth and mild detergent.
3. DO NOT use an abrasive cleaner on this instrument.
4. DO NOT use acetone or other volatile solvents for cleaning.
5. DO NOT use any sharp or pointed instrument to depress keys.