Specifications

18
3%450!.$#!,)"2!4)/.02/#%$52%CONT
"#?a"!2#/$%02%&)8,)-)4a
If the bar code printing prompt (3:?) was answered Yes, this prompts the operator to
set a limit for the bar code prefix. Allowable values are 4 or 5.
Entering a 4, will allow a total price of 6 digits and limit the bar code prefix to 4 digits.
Entering a 5, will allow a total price of 5 digits and allow a bar code prefix of 5 digits.
With the display showing 3"1?, observe the current setting. If the setting displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a
new value, then press the %.4%2 key to save it.
&%?a"!2#/$%02%&)8a
With the display showing 3:9?, observe the current setting. If the setting displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a
new value, then press the %.4%2 key to save it. Enter 4 or 5-digits (depending on what
was selected for the previous bar code prefix limit prompt (3"1?).
#.1?a-).54%3
With the display showing #.1?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are: 0 through 59.
7(:?a(/523
With the display showing 7(:?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are: 0 through 23.
./4%The time is entered in a 24-hour format. When entering times after noon (12:00 PM),
you must add 12 to the time. For example, 3:00 PM would be entered as 15.
4>?a$!9
With the display showing 4>?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are: 1 through 31.
#71?a-/.4(
With the display showing #71?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are: 1 through 12.
>:?a9%!2
With the display showing >&?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are: 00 through 99.
4715a$/.%
This message will be displayed briefly, indicating that calibration/setup is complete and
calibration data will be stored at this time. The scale will reset, display the model number and
software revision momentarily and then display weight. Replace the right side cover and
secure using the four (4) screws and two (2) calibration sealing tabs removed earlier. Check
for proper weighing. The scale is ready to use.