Specifications
15
3%450!.$#!,)"2!4)/.02/#%$52%CONT
:?a&2!#4)/.+%93a
With the display showing :?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are:
0 = Fraction keys are disabled in lb mode or only 100g in kg mode
1 = Enables both fraction keys (lb or kg mode)
2 = Disables both fraction keys (lb or kg mode)
':?a4!2%&5.#4)/.3a
With the display showing <:?, observe the current setting. If the value displayed is
acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new
value, then press the %.4%2 key to save it. Allowable values are:
0 = Disables keypad tare and enables push button tare
1 = Enables both keypad and push button tare
2 = Disables both keypad and push button tare
$'&?a!54/-!4)#:%2/42!#+).'a
With the display showing 7<:?, observe the current setting. If the setting displayed is
acceptable, press the %.4%2 key to save it. Otherwise, using the numeric keys, ./ or
9%3, enter the new setting, then press the %.4%2 key to save it. Allowable values are:
0 = NO (Disable Automatic Zero Tracking)
1 = YES (Enable Automatic Zero Tracking, 1 Division)
.a"<? &),4%2,%6%,3%,%#4)/.
The display will change to show .a"<? which is the prompt for the selection of the digital
filtering level. Please check with your scale service technician should you wish to change the
filter level, break range and sample rate.
Observe the current setting. If the value displayed is acceptable, press the %.4%2 key to
save it. Otherwise, use the numeric keys to enter a new value, then press the %.4%2 key to
save it. Allowable values are: 0, 1, 2 or 3. Note, that if you select 3 (Custom Filtering) three
additional prompts will be displayed.
0 = NO Filtering and a sample rate of 3 samples per second
1 = Changes the sample rate to 4 samples per second (factory setting)
2 = Changes the sample rate to 4 samples per second
3 = Allows customizing the filter for special needs
./4% The prompts, ? (Filter Level), 3:? (Break Range) and +&? (Sample Rate)
will only be displayed if you select 3 (Custom Filtering) for the .a"<?Filter Level.
?&),4%2,%6%,
If you select Custom Filtering, the display will change to show ?, the Filter Level. The
filter level is a number from 1 to 16 that corresponds to the level of filtering with 16 being
the greatest filtering and 1 the least.
Observe the current setting. If the value displayed is acceptable, press the %.4%2 key to
save it. Otherwise, use the numeric keys to enter a new value, then press the %.4%2 key
to save it. Allowable values are: 1 through 16.