Specifications

3%450!.$#!,)"2!4)/.02/#%$52%CONT

"$4?a,/!$#!,)"2!4)/.7%)'(4

The display will change to "$4? which is a prompt for the entry of the calibration weight

value and placement of the test weights on the scale platform.



./4%If recalibration is not desired, press the 0 (zero) key on the numeric keypad, then

press the %.4%2key and proceed to (%4%?.

1. If recalibration is desired, make certain the scale platform is empty and free of debris,

then apply a weight equal to 70% to 100% of the scale capacity to the scale (do not use

fractional lb or kg weights).

2. Using the numeric keypad, input the value of the test weight and press the %.4%2key.

3. Press the %.4%2key.

(1"$4?a5.,/!$#!,)"2!4)/.7%)'(4

After a moment the display will change to (1"4?a%:++a1<:awhich is a request that

the test weights be removed from the scale platform. Remove the weights then press the

%.4%2 key. The calculated calibration factor is now stored in the indicator’s nonvolatile

memory.

(%4%?a5.)402)#%$%#)-!,0,!#%3a

With the display showing (%4%?, observe the current setting. If the value displayed is

acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new

value, then press the %.4%2 key to save it. Allowable values are:

0 = XXXXXX 1= XXXXXX 2 = XXXXXX 3 = XXXXXX

./4% The number of decimal places in the unit price does not affect the preset prices.

<%4%?a4/4!,02)#%$%#)-!,0,!#%3a

With the display showing <%4%?, observe the current setting. If the value displayed is

acceptable, press the %.4%2 key to save it. Otherwise, use the numeric keys to enter a new

value, then press the %.4%2 key to save it. Allowable values are:

0 = XXXXXX 1= XXXXXX 2 = XXXXXX 3 = XXXXXX

&#?a2/5.$4/4!,02)#%a

With the display showing :14?, observe the current setting. If the setting displayed is

acceptable, press the %.4%2 key to save it. Otherwise, using the numeric keys, ./ or

9%3, enter the new setting, then press the %.4%2 key to save it. Allowable values are:

0 = NO (Normal Operation) 1 = YES (Round to nearest 5)

'%"?a4/4!,02)#%",!.+).'a

With the display showing <%3"?, observe the current setting. If the setting displayed is

acceptable, press the %.4%2 key to save it. Otherwise, using the numeric keys, ./ or

9%3, enter the new setting, then press the %.4%2 key to save it. Allowable values are:

0 = NO (Disable) Total price is shown when scale motion is present.

1 = YES (Enable) Total price is blanked out when scale motion is present