Specifications

8
/0%2!4)/.#ONT
4ARE/PERATIONFOR+NOWN4ARECONTAINER7EIGHT
Note: Known tare weights must be entered as numbers compatible with the particular scale
division. Example: 30 lb x 0.01 = increments of 0.01 - 15 kg x 0.005 increments of 0.005. Any
known tare entry not compatible with particular scale counting increments will be replaced and
scale will display A.1<A. Press the #,%!2 key and re-enter correct compatible number.
lb Models
1. Key in known tare weight, up to 4 digits (ignoring the decimal point), as a number
appearing in the unit price display.
2. Press the 4!2% key. Entry will move to the weight display and be shown as negative (-)
weight. Net indicator will illuminate.
3. Place container and commodity on scale. Net weight of commodity will be displayed.
Enter unit price and proceed with price-computing operation.
4. After known tare operation is complete, tare weight will clear automatically after a positive
weight is indicated, unit price has been entered and commodity is removed from scale.
5. When the weight is at c/z (center of zero), any tare can be cleared by pushing the #,%!2
key. Note! Automatic tare clear is inoperable when scale is in the PREPACK mode.
kg Models
1. Key in known tare weight, up to 4 digits, as a number appearing in the unit price display
(ignore decimal point). Example:
Key in 0.28 kg as 2-8-0 Key in 1.000 kg as 1-0-0-0
Key in 0.095 kg as 9-5 Key in 1.200 kg as 1-2-0-0
2. Press the 4!2% key. The acceptable tare entry will move to the weight display and be
shown as negative(-) weight. Example: a tare entry of 1.50 kg should appear in the unit
price display as 15.00. After the 4!2% key is pressed, the weight disply will show - 1.500
and Net indicator will illuminate.
3. After known tare operation is complete, tare weight will automatically clear after a positive
weight is indicated, unit price has been entered and commodity is removed from scale.
Note! Automatic tare clear is inoperable when scale is in the PREPACK mode.