Specifications

2
COMPONENTS AND CONTROLS
Weight
Display
Unit
Price$
Display
Total
Price$
Display
Printer
Output
Cable
Capacity
Commodity Tray
Numeric
Keys (10)
Weight
Display
Unit
Price$
Display
Total
Price$
Display
Adjustable Feet
Function
Keys (10)
ON/OFF
Keys
INSTALLATION
1. UNPACK
Carefully unpack the scale and commodity tray. Remove the protective film from the front and
rear displays. Make certain that no sign of damage to the instrument is visible. Should evidence of
damage be found, the carrier should be contacted at once. Make certain to keep the carton and
packing material should return shipment or storage of the instrument become necessary.
SHIPPING SCREWS
The load cell is protected from shipping damage by two (2) shipping screws through the top
housing and one (1) shipping thumb screw located on the bottom of the scale (see figure). Remove
the two (2) shipping screws, the thumb screw and the warning label before using the scale. Retain
the two (2) shipping screws and the thumb screw to be re-installed before transporting or shipping
the scale.
Note: Only hand tighten the thumb screw on the bottom of the scale and do not
over-tighten the two (2) shipping screws through the top housing.
CAUTION!!! Transporting or shipping the scale without the shipping screws
installed will void the load cell warranty.