Specifications

14
2. Operator keys in one or two digits (00 to 99) representing the price preset number, then
presses the ENTER key.
3. Repeat both steps to recall other preset prices.
4. Press the CLEAR key to return to normal operation mode.
DATE ENTRY (must be re-entered if power is interrupted)
1. Operator presses DATE key and is prompted for Packed on date (PdAtE).
2. Operator keys in six digits (MM DD YY) repesenting the packed on date, then presses the
ENTER key.
3. Operator is prompted for Sell by date (SdAtE).
4. Operator keys in six digits (MM DD YY) repesenting the sell by date, then presses the
ENTER key.
NOTE: To change only the sell by date, press the CLEAR key at the packed on date prompt.
RECOMMENDED SEALING
To prevent access to interior components, seal the indicator as follows:
1. Bend tab over end cap retaining
screw as shown. Press the tab down
against the screw head. Make certain
both screws are tightened securely
before proceeding.
2. Thread the sealing wire through the
hole in the tabs as shown. Pull the
wire tight and install the lead seal.
Neither screw can be removed
without damaging the seal.
CARE AND MAINTENANCE
1. DO NOT subject the commodity tray to sudden shocks.
2. DO NOT submerge the scale in water or spray water directly on the scale. The scale may be
cleaned using a damp soft cloth and mild detergent.
3. DO NOT use an abrasive cleaner on this instrument.
4. DO NOT use acetone or other volatile solvents for cleaning.
5. DO NOT use any sharp or pointed instrument to depress keys.
Right Side
Cover
Sealing Tab
Lead Seal
Bend tab
over screw
Sealing Wire
WEIGHT UNIT PRICE $
326
TOTAL PRICE $
lb
100g
250g
kg
P
E
R
PPK
ZERO
NET
0000
0000
WEIGHT UNIT PRICE $
SdAtE
TOTAL PRICE $
lb
100g
250g
kg
P
E
R
PPK
ZERO
NET
060800
WEIGHT UNIT PRICE $
PdAtE
TOTAL PRICE $
lb
100g
250g
kg
P
E
R
PPK
ZERO
NET
060800
0000