Specifications
11
SETUP AND CALIBRATION PROCEDURE (cont.)
13. bAUd= Enter the value for the baud rate desired and press the ENTER key.
12 = 1200 baud 48 = 4800 baud 19 = 19.2k baud
24 = 2400 baud 96 = 9600 baud 38 = 38.4k baud
14. PAr= Enter the value for the parity setting desired and press the ENTER key.
0 = no parity (8-N-1) 1= even parity (7-E-1) 2 = odd parity (7-O-1)
15. Prt= Enter the value for the type of label printer to be used and press the ENTER key.
0 = P200 (Eltron Companion Plus)
1 = user defined (via Visual Print)
2 = P200 (Eltron Companion Plus) with DSR handshake check
3 = user defined (via Visual Print) with DSR handshake check
16. SdLY= Enter the vale to select the delay before responding to a “W” received on the serial port.
Allowable values are 0 (no delay) to 255. The actual delay time (in second) is the SdLY value
entered multiplied by 0.2. For example:
If a 1 second delay is desired, then SdLY= 5 (5 x 0.2 = 2)
If a 2 second delay is desired, then SdLY= 10 (10 x 0.2 = 2)
17. id= Operator is prompted for up to 32 characters of a store name/ID. Characters are entered
in ASCII decimal form (see following table). Each 2 or 3 digit character definition entered will
appear in the unit price window as it is keyed and a character will appear in the total price
window. Enter a 0 (zero) and press the ENTER key twice to end character definition entry. To
review the characters entered, use the ZERO key to back up and the PRINT key to go forward.
WEIGHT UNIT PRICE $ TOTAL PRICE $
P
E
R
bAUd=
lb
100g
250g
kg
PPK
ZERO
NET
96
WEIGHT UNIT PRICE $
0
PAr=
TOTAL PRICE $
lb
100g
250g
kg
P
E
R
PPK
ZERO
NET
WEIGHT UNIT PRICE $
0
Prt=
TOTAL PRICE $
lb
100g
250g
kg
P
E
R
PPK
ZERO
NET
WEIGHT UNIT PRICE $
65
id=
TOTAL PRICE $
lb
100g
250g
kg
P
E
R
PPK
ZERO
NET
4