Owner`s manual

8528-M372-O1 Rev E  PZ3000 Series

ANNUNCIATORS

The annunciators are turned on to indicate that the display is in the mode corresponding to the

annunciator label or that the status indicated by the label is active.

The low battery annunciator is located in the upper left corner of the display. It is used to indicate

the battery status. Refer to the Power Connection section of this manual for more details.

GROSS

This annunciator is turned on to show that gross weight is displayed. Gross weight will be

displayed when no tare weight is stored.

 (STABLE)

This annunciator is turned on when the weight display is stable. When off, it means that the

change in successive weight samples is greater than the motion limits selected during setup.

ZERO

This annunciator is turned on to indicate that the weight displayed is within +/- 1/4 division of the

center of zero.

This annunciator is turned on to indicate the weight displayed is in kg (kilograms).

POUNDS

This annunciator is turned on to indicate the weight displayed is in pounds.

OUNCES

This annunciator is turned on to indicate the weight displayed is in ounces.

3/4

This annunciator is turned on to indicate the weight displayed is to the nearest 3/4 ounce.

1/2

This annunciator is turned on to indicate the weight displayed is to the nearest 1/2 ounce.

1/4

This annunciator is turned on to indicate the weight displayed is to the nearest 1/4 ounce.