Owner`s manual

PD300
Assembly
Installing the Column and Display, Cont.
6. Insert the M4 machine screw through the column
holder into the column and tighten the screw to
attach the column to the column holder.
Figure No.13
Column
Holder
M4 Machine Screw
Column
Column
Holder
Column
Cover
Figure No. 14
7. Slide the column cover down the column and into
the column holder.
7.1. Locate the two (2) tabs on the front of the
column cover and the two (2) slots in the
column holder.
7.2. Align the tabs with the slots and press
together until the tabs on column cover
snaps into slots of the column holder.
Column
Holder
M2.3
Screw
M4.5x25 Machine Screws
Column
Cover
Column
8. Lay the scale down with the column
horizontal to the desk or table.
8.1. Attach back of column cover to the
column holder using the M2.3 screw.
8.2. Insert the two (2) M4.5x25 machine
screws through the holes in the
column holder into the column and
tighten the screws to secure the
column to the column holder.
Figure No. 15
0044-M340-O1 y ProDoc Series
Page 10