PL400 Patient Lift Scale Indicator Owner’s Manual 8551-M912-01 Rev D 08/14 CARDINAL SCALE MFG. CO. PO BOX 151 WEBB CITY, MO 64870 PH (417) 673-4631 - FAX (417) 673-5001 www.cardinalscale.com Technical Support: Ph: 866-254-8261 techsupport@cardet.
INTRODUCTION Thank you for purchasing our DETECTO™ Model PL400 Patient Lift Scale Indicator. It has been manufactured with quality and reliability at our factory in Webb City, MO USA. This instrument has been tested before leaving our factory to insure accuracy and dependability for years to come. This manual is provided to guide you through installation, operation and maintenance of your indicator.
EUROPEAN DECLARATION OF CONFORMITY Manufacturer: Cardinal Scale Manufacturing Company PO Box 151 203 East Daugherty Webb City, Missouri 64870 USA Telephone No. (417) 673-4631 Fax No.
INSTALLATION The Detecto PL400 Patient Lift Scale Indicator is a completely self-contained, battery-powered instrument that is used to determine the weight of a person suspended from a portable patient lift mechanism. The PL400 consists of a weight indicator with an integral tension load cell and with its small size and simple, easy operation; it can be used where standard indicators are too large and cumbersome.
KEYPAD FUNCTIONS The PL400 Patient Lift Scale Indicator has a membrane keypad containing three (3) keys. The keypad is shown in Figure No. 3. The following describes the use of each key: The membrane keyboard is not to be operated with pointed objects (pencils, pens, fingernail, etc.). Damage to the keypad from this practice will NOT be covered under warranty. ON ZERO Figure No. 3 Pressing this key will apply power to the instrument and turn on the indicator display.
AUTOMATIC SHUT-OFF FEATURE . The PL400 is equipped with an automatic shut-off feature that helps prolong battery life by turning the indicator off after a preset amount of time after a stable weight reading has been reached. To turn the indicator back on you must press the ON/ZERO key.
SETUP AND CALIBRATION 1. To begin Setup and Calibration, press the ON/ZERO key to turn the indicator on, then when the display is showing r 1.2 , simultaneously press the ON/ZERO and the lb/kg keys. 2. The indicator will display CAL. Press the ON/ZERO key to select 0 = do not calibrate (allows you to setup the indicator without calibrating) or 1 = enter calibration, and then press the lb/kg key to save the setting. If you select 0 = do not calibrate, then proceed to step 6.
PARTS IDENTIFICATION 9 8 7 6 5 4 3 2 10 1 Item Part No.
STATEMENT OF LIMITED WARRANTY Detecto Scale warrants its equipment to be free from defects in material and workmanship as follows: Detecto warrants to the original purchaser only that it will repair or replace any part of equipment which is defective in material or workmanship for a period of one (1) year from date of shipment. Detecto shall be the sole judge of what constitutes a defect.
STATEMENT OF LIMITED WARRANTY Conditions Which Void Limited Warranty This warranty shall not apply to equipment which: A.) Has been tampered with, defaced, mishandled or have had repairs and modifications not authorized by Detecto. B.) Has had serial number altered, defaced, or removed. C.) Has not been grounded according to Detecto’s recommended procedure. Freight Carrier Damage Claims for equipment damaged in transit must be referred to the freight carrier in accordance with freight carrier regulations.
10 8551-M912-O1 Rev D PL400 Owner’s
