Operating instructions

8525-M041-O1 Rev L  8430 Series
4
OPERATION
MedVue MV1 Keypad
Basic Operation
To Weigh
1. Press ON/OFF key to turn the MV1 on.
2. Press ZERO key to zero weight display. ZERO, GROSS and lb or kg annunciator will
turn on to show that the scale is ready for use.
3. Place patient on scale and read weight display.
4. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.
5. Remove patient from scale.
Zero Weight Display
1. In Gross Weight mode (GROSS annunciator on), press ZERO key.
2. Weight display will return to zero. ZERO and STABLE  annunciators will turn on to
show a stable, center-of-zero gross weight condition.
Metric Conversion
Press the UNITS key to toggle between pounds and kilograms. The lb or kg annunciator will
turn on to show the weighing unit selected. In addition, the height units will change from
feet/inches to centimeters. NOTE: This is only available if configured in Calibration Setup.