Operating instructions

1930-M458-O1 Rev-E  Waist-High 685X Series

OPERATION, CONT.

6854DHR, 6854KGEUDHR, 6857DHR or 6857KGEUDHR

To Weigh and Calculate BMI

Manually Entering Height

1. Press ON/OFF key to turn the indicator on.

2. Press ZERO key to zero weight display. ZERO, GROSS and lb or kg annunciator will

turn on to show scale is ready for use.

3. Perform tare operation if required. Refer to Push Button Tare or Tare Weight Entry in

previous section for instructions on using tare.

4. Press ID/HEIGHT key.

5. If Centimeters was selected for HEIGHT UNITS in setup, the display will change to show

CENTIMETERS.

a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and

then press PRINT/ENTER key.

6. If Millimeters was selected for HEIGHT UNITS in setup, display will change to show

MILLIMETERS.

a. Use numeric keys to enter up to 4 digits (# # # #) for height in millimeters and then

press PRINT/ENTER key.

7. Place patient on the scale.

8. Read weight and BMI displays.

9. If a printer is connected to scale, press PRINT/ENTER key to print a ticket. Note that

BMI and height display will clear when ticket prints.

10. Remove patient from scale.

11. If a printer is not connected to scale, BMI display will clear when patient is removed from

scale and weight returns to zero.