Operating instructions

1930-M458-O1 Rev-E  Waist-High 685X Series

OPERATION, CONT.

6854DHR, 6854KGEUDHR, 6857DHR or 6857KGEUDHR

DO NOT operate the keypad with pointed objects (pencils, pens, etc).

Damage to keypad resulting from this practice is NOT covered under warranty.

MedVue Keypad

To Weigh

1. Set scale on any hard, level, flat surface or low-cut carpet.

2. Press ON/OFF key to turn the indicator on.

3. Press ZERO key to zero weight display. ZERO, GROSS and lb or kg annunciator will

turn on to show that the scale is ready for use.

4. Place patient on scale and read weight display.

5. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.

6. Remove patient from scale.

Zero Weight Display

1. In Gross Weight mode (GROSS annunciator on), press ZERO key.

2. Weight display will return to zero. ZERO and STABLE  annunciators will turn on to

show a stable, center-of-zero (0) gross weight condition.

Metric Conversion

Press the UNITS key to toggle between pounds and kilograms. The lb or kg annunciator

will turn on to show the weighing unit selected. In addition, the height units will change

from feet/inches to centimeters. NOTE: This is only available if configured in Calibration

Setup.