Instruction manual

8526-M256-O1 Rev B • CS Series
16
OPERATIONAL SETUP, CONT.
0` – Pre-Tare Mode
1. With the WEIGHT display showing 0` with the 8 flashing, press the 9 key on
the alphanumeric keypad.
2. The WEIGHT display will change to 0`  with the 9 flashing.
3. Press the MC key.
4. The PIECE WEIGHT display will change to show the current setting.
5. If the setting displayed is acceptable, press the MC key to save it.
6. Otherwise, select the desired setting for the Pre-Tare Mode and press the MC key to
save it.
 = Pre-Tare can not proceed when there is weight on the platter. When there is no
weight on the platter, press the TARE key to enter the Pre-Tare value, and then
press the TARE key again to complete.
 = Pre-Tare can proceed when there is weight on the platter (enter digit in the unit
weight column and then press the TARE key).
When there is weight on the scale, enter Pre-Tare data in the unit weight column.
Example: enter “1”, “1.0”, “1.00” or “1.000” and then press the TARE key again to
complete the Pre-Tare “1kg”.
Pre-Tare value can not be more than maximum weighing value, or the first and second
segment point of division. Also, the value can not be less than or equal to the external
value set up in "`.
0` – Beeper Sound Output Condition Under Quantity Mode
1. With the WEIGHT display showing 0` with the 9 flashing, press the 0 key,
the CE key and then the 1 key on the alphanumeric keypad.
2. The WEIGHT display will change to 0`  with the 0 flashing.
3. Press the MC key.
4. The PIECE WEIGHT display will change to show the current setting.
5. If the setting displayed is acceptable, press the MC key to save it.
6. Otherwise, select the desired setting for the Beeper Sound Output Condition Under
Quantity Mode and press the MC key to save it.
 = If the weighing quantity exceeds quantity setting (or weight exceeds weight setting),
the beeper will sound when the weight is unstable.
 = If the weighing quantity exceeds quantity setting (or weight exceeds weight setting),
and it doesn’t matter if the weight is stable, the beeper will sound automatically.