Specifications
8200-M538-O1 Rev C y 225 Installation & Technical
88
CALIBRATION AND SETUP, CONT.
LOCAL REMOTE PORT
NOTE! Although shown on this example of SETUP MENU #3, the setup
parameter .42QTV will only be displayed when TYPE=SERIAL has been
selected in SCALE 1 SETUP MENU #1.
5'672/'07
)0#%%7/5:::-';.1%-176
$#%-.+6':.42QTV%1/
2#55914&
'PVGT5GNGEVKQP@24'8B':+6
.42QTV (LOCAL REMOTE PORT)
With the SETUP MENU #3 displayed the current setting for the .42QTV parameter
will be shown. This is the serial port the indicator will use for the Local/Remote
connection. Note that COM3 is the current port shown. This is the system default port.
If the setting displayed is acceptable, press EXIT (Navigation Keys V Down Arrow) to
return to the SETUP/REVIEW MENU.
Otherwise, press the 7 key, the ENTER key and then using the numeric keys, enter the
value for the serial port the indicator will use for the Local/Remote port and then press
the ENTER key to save the new setting and return to the SETUP MENU #3. Allowable
values are 1, 2 or 3. NOTE! 3=COM3 is the default setting.
5'672/'07
5GNGEV.QECN4GOQVG2QTV
%1/%1/%1/
.42QTV
With the SETUP MENU #3 displayed,
y Press PREV (Navigation Keys U UP Arrow) to return to SETUP MENU #2.
y Press EXIT (Navigation Keys V Down Arrow) to return to the SETUP/REVIEW MENU.