Specifications

8200-M538-O1 Rev C y 225 Installation & Technical

CALIBRATION AND SETUP, CONT.

.#$'. – CUSTOM UNITS LABEL

The display will show .#$'.::, where XX is the current setting for the custom units

label. Press the ENTER key to keep the displayed value or use the alphanumeric keys

to enter a new value and press the ENTER key to save the new setting. Note, that only

2 characters are allowed.

<64#%-:: (ZERO TRACKING RANGE)

With SCALE 1 SETUP MENU #1 displayed the current setting for the <64#%-

parameter will be shown. Note that X.X is the current value. If the setting displayed is

acceptable, proceed to the next setup parameter.

Otherwise, press the 3 key, the ENTER key and then using the numeric keys, enter the

value for the zero tracking range and then press the ENTER key to save the new setting

and return to SCALE 1 SETUP MENU #1. Allowable values are 0.0 (disables Zero

Tracking), 0.5, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0 and 9.0.

<.+/+6::: (ZERO LIMIT RANGE)

With SCALE 1 SETUP MENU #1 displayed the current setting for the <.+/+6

parameter will be shown. Note that XXX is the current value. If the setting displayed is

acceptable, proceed to the next setup parameter.

Otherwise, press the 4 key, the ENTER key, YES or NO (on the soft keys) and then the

ENTER key to save the new setting and return to the

<.+/+6;'5 <.+/+601

4% (±2%) of scale capacity Full capacity (no limit)

29472<::: (POWER-UP ZERO FEATURE)

With SCALE 1 SETUP MENU #1 displayed the current setting for the 29472<

parameter will be shown. Note that XXX is the current value. If the setting displayed is

acceptable, proceed to the next setup parameter.

Otherwise, press the 4 key, the ENTER key, YES or NO (on the soft keys) and then the

ENTER key to save the new setting and return to the

271;'5 27101

Automatic Re-Zero on Power-Up No Re-Zero on Power-Up