Specifications

8200-M538-O1 Rev C y 225 Installation & Technical
58
CALIBRATION AND SETUP, CONT.
DIO SETUP (PWC Status)
IMPORTANT! The DIO SETUP (PWC Status) cannot be selected if Mode of
Operation = 0, Normal Indicator is enabled.
With the SETUP MENU #1 displayed, press NEXT (Navigation Keys V Down Arrow) to
proceed to SETUP MENU #2.
5'672/'07
5'4+#.
&+1
24+066#$5
5'6725%#.'
%#.+$4#6'
'PVGT5GNGEVKQPB0':6@24'8
&+1 (TOGGLE PWC STATUS)
With the SETUP MENU #2 displayed, press the 2 key and then the ENTER key to proceed
to the DIO SETUP MENU.
&+15'672/'07
29%1((29%1((29%1((29%1((
29%1((29%1((29%1((#..1((

29%1((29%1((29%1((#..10
29%1((29%1((29%1((
29%1((29%1(( 29%1((
'PVGT29%VQ6QIING@':+6
With the DIO SETUP MENU displayed, the current “state before cutoff” status of the 16
Preset Weight Comparators (PWC) will be shown. If the status displayed is acceptable,
press EXIT (Navigation Keys U UP Arrow) to exit and return to the SETUP MENU #2.
Otherwise, press the PWC number, 17 or 18 to toggle the status (turn ON, relay closed
or OFF, relay open) and then press the ENTER key to save the new setting.
IMPORTANT! When power to the indicator is lost, the output goes to the OFF state.