Specifications

8200-M538-O1 Rev C y 225 Installation & Technical

CALIBRATION AND SETUP, CONT.

6;2'::::::::::: (COM1 CONTINUOUS OUTPUT SELECTION)

With the COM1 SETUP MENU displayed the current setting for the 6;2' parameter

will be shown. Note that X is the current value and XXXXXXXXXX is the description. If

the setting displayed is acceptable, proceed to the next setup parameter.

Otherwise, press the 6 key, the ENTER key and then using the numeric keys, enter the

value for the printer continuous output selection and then press the ENTER key to save

the new setting and return to the COM1 SETUP MENU. Allowable values are 0 through

7 and 9.

0 = SMA 4 = NUMERIC WT 9 = TALLEY (See Note 2)

1 = SB400 5 = SB500

2 = TOLEDO (See Note 1) 6 = SB250/500M

3 = IQ355

NOTE 1! If you selected 61.'&1 for the 6;2' parameter, the following setup

menu parameters will be shown after pressing the ENTER key:

%1/%106+071751762765'.'%6+10

PQ%-57/

5*146PQ%-57/

YKVJ%-57/

5*146YKVJ%-57/



61.'&1(QTOCV:

With the COM1 CONTINUOUS OUTPUT SELECTION menu displayed the current

setting for the 61.'&1(QTOCV parameter will be shown. Note that X is the

current value. If the setting displayed is acceptable, press the ENTER key to save the

new setting and return to the COM1 SETUP MENU.

Otherwise, using the numeric keys, enter the value for the TOLEDO Format and then

press the ENTER key to save the new setting and return to COM1 SETUP MENU.

Allowable values are 0, 1, 2, or 3.

NOTE 2! 9=TALLEY is displayed only if 75#01 and /1&'1(12, , ,  or .

Refer to the ELECTRONIC TALLEY ROLL section of this manual.