Specifications

8200-M538-O1 Rev C y 225 Installation & Technical
52
CALIBRATION AND SETUP, CONT.
6JTGU9V::::::: (THRESHOLD WEIGHT FOR AUTO MODE)
With the PRINTER SETUP MENU displayed the current setting for the 6JTGU9V
parameter will be shown. Note that XXXXXXX is the current value. If the setting
displayed is acceptable, press EXIT (Navigation Keys U UP Arrow) to return to the
Serial Menu.
Otherwise, press the 1 and 0 keys, the ENTER key and then using the numeric keys,
enter the value for the threshold weight
1
used to control the traffic light auto mode and
then press the ENTER key to save the new setting and return to the PRINTER SETUP
MENU. Note that entering 0 disables the traffic light auto mode.
1
If scale gross weight is less than or equal to threshold weight, traffic light will be Green.
When scale gross weight is greater than threshold weight, traffic light will be Red.
NOTE! If manual light mode is disabled (/CPWCN/QFG01) and 0 is entered
for the threshold weight (6JTGU9V), the traffic light feature will be disabled
(turned off).
Printer Setup Completed
The printer setup has been completed, press EXIT (Navigation Keys U UP Arrow) to return to
the Serial Menu and proceed to the COM port (serial port) setup.