Specifications
8200-M538-O1 Rev C y 225 Installation & Technical
51
CALIBRATION AND SETUP, CONT.
5%#.': (SCALE USED FOR PRINTER DATA)
With the PRINTER SETUP MENU displayed the current setting for the 5%#.'
parameter will be shown. Note that X is the current value. If the setting displayed is
acceptable, proceed to the next setup parameter.
Otherwise, press the 7 key, the ENTER key and then using the numeric keys, enter the
value for the scale the printer will receive data from and then press the ENTER key to
save the new setting and return to the PRINTER SETUP MENU. Allowable values are
1 through 4. NOTE! Scale 1 is the default setting. Also note, 4 is the Scale Totalizer.
+410::: (INFRARED “IR” DATA PORT)
With the PRINTER SETUP MENU displayed the current setting for the +410
parameter will be shown. Note that XXX is the current value. If the setting displayed is
acceptable, press EXIT (Navigation Keys U UP Arrow) to return to the Serial Menu.
Otherwise, press the 8 key, the ENTER key, YES or NO (on the soft keys) and then the
ENTER key to save the new setting and return to the PRINTER SETUP MENU.
+410;'5 +41001
IR Data Port is Enabled and IR
input is allowed.
IR Data Port is Disabled and IR
input will be ignored.
NOTE! If you selected 5$ for the 6;2' parameter, the following
setup parameters /CPWCN/QFG and 6JTGU9V will be shown on the
PRINTER SETUP MENU.
/CPWCN/QFG::: (MANUAL LIGHT MODE)
With the PRINTER SETUP MENU displayed the current setting for the
/CPWCN/QFG parameter will be shown. Note that XXX is the current value. If the
setting displayed is acceptable, press EXIT (Navigation Keys U UP Arrow) to return to
the Serial Menu.
Otherwise, press the 9 key, the ENTER key, YES or NO (on the soft keys) and then the
ENTER key to save the new setting and return to the PRINTER SETUP MENU.
/CPWCN/QFG;'5 /CPWCN/QFG01
Manual Mode is Enabled. Pressing
START/STOP key will toggle traffic
light between Green and Red.
Manual Mode is Disabled.
Threshold weight is used to toggle
light between Green and Red.