Specifications
8200-M538-O1 Rev C y 225 Installation & Technical
50
CALIBRATION AND SETUP, CONT.
%106::: (PRINTER CONTINUOUS OUTPUT)
With the PRINTER SETUP MENU displayed the current setting for the %106
parameter will be shown. Note that XXX is the current value. If the setting displayed is
acceptable, proceed to the next setup parameter.
Otherwise, press the 5 key, the ENTER key, YES or NO (on the soft keys) and then the
ENTER key to save the new setting and return to the PRINTER SETUP MENU.
%106;'5 %10601
Continuous Output Enabled Continuous Output Disabled
6;2'::::::::::: (PRINTER CONTINUOUS OUTPUT SELECTION)
With the PRINTER SETUP MENU displayed the current setting for the 6;2'
parameter will be shown. Note that X is the current value and XXXXXXXXXX is the
description. If the setting displayed is acceptable, proceed to the next setup parameter.
Otherwise, press the 6 key, the ENTER key and then using the numeric keys, enter the
value for the printer continuous output selection and then press the ENTER key to save
the new setting and return to the PRINTER SETUP MENU. Allowable values are 0
through 7 and 9.
0 = SMA 3 = IQ355 6 = SB250/500M
1 = SB400 4 = NUMERIC WT
2 = TOLEDO (See Note) 5 = SB500
NOTE! If you selected 61.'&1 for the 6;2' parameter, the following setup menu
parameters will be shown after pressing the ENTER key:
24+064%106+071751762765'.'%6+10
PQ%-57/
5*146PQ%-57/
YKVJ%-57/
5*146YKVJ%-57/
61.'&1(QTOCV:
With the PRINTR CONTINUOUS OUTPUT SELECTION menu displayed the current
setting for the 61.'&1(QTOCV parameter will be shown. Note that X is the
current value. If the setting displayed is acceptable, press the ENTER key to save the
new setting and return to the PRINTER SETUP MENU.
Otherwise, using the numeric keys, enter the value for the TOLEDO Format and then
press the ENTER key to save the new setting and return to PRINTER SETUP MENU.
Allowable values are 0, 1, 2, or 3.