Specifications

8200-M538-O1 Rev C y 225 Installation & Technical

CALIBRATION AND SETUP, CONT.

$#7&::::::: (PRINTER PORT BAUD RATE)

With the PRINTER SETUP MENU displayed the current setting for the $#7&

parameter will be shown. Note that X is the current value and XXXXXX is the actual

baud rate. If the setting displayed is acceptable, proceed to the next setup parameter.

Otherwise, press the 1 key, the ENTER key and then using the numeric keys, enter the

value for the printer port baud rate and then press the ENTER key to save the new

setting and return to the PRINTER SETUP MENU. Allowable values are 0 through 13.

0 = 300

4 = 4800 8 = 28800 12 = 115200

1 = 600 5 = 9600 9 = 38400 13 = 230400

2 = 1200 6 = 14400

10 = 57600

3 = 2400 7 = 19200 11 = 76000

2#4+6;::::: (PRINTER PARITY RATE)

With the PRINTER SETUP MENU displayed the current setting for the 2#4+6;

parameter will be shown. Note that X is the current value and XXXX is the description.

If the setting displayed is acceptable, proceed to the next setup parameter.

Otherwise, press the 2 key, the ENTER key and then using the numeric keys, enter the

value for the printer parity rate and then press the ENTER key to save the new setting

and return to the PRINTER SETUP MENU. Allowable values are 0, 1 or 2.

0 = NONE (No Parity) 1 = Odd Parity 2 = Even Parity

$+65: (PRINTER DATA BITS)

With the PRINTER SETUP MENU displayed the current setting for the $+65

parameter will be shown. Note that X is the current value. If the setting displayed is

acceptable, proceed to the next setup parameter.

Otherwise, press the 3 key, the ENTER key and then using the numeric keys, enter the

value for the printer data bits and then press the ENTER key to save the new setting

and return to the PRINTER SETUP MENU. Allowable values are 7 or 8.

56125: (PRINTER STOP BITS)

With the PRINTER SETUP MENU displayed the current setting for the 56125

parameter will be shown. Note that X is the current value. If the setting displayed is

acceptable, proceed to the next setup parameter.

Otherwise, press the 4 key, the ENTER key and then using the numeric keys, enter the

value for the printer stop bits and then press the ENTER key to save the new setting

and return to the PRINTER SETUP MENU. Allowable values are 1 or 2.