Specifications

8200-M538-O1 Rev C y 225 Installation & Technical
47
CALIBRATION AND SETUP, CONT.
/1&'1(12::::: (MODE OF OPERATION)
With SETUP MENU #1 displayed the current setting for the /1&'1(12 parameter will
be shown. Note that X is the current value and XXXX is the mode of operation abbreviation.
If the setting displayed is acceptable, press NEXT (Navigation Keys V Down Arrow) to
proceed to SETUP MENU #2 or press EXIT (Navigation Keys U UP Arrow) to return to the
SETUP/REVIEW MENU.
Otherwise, press the 1 and 0 keys and then the ENTER key. The display will change to
show the /QFG1H1RGTCVKQP/GPW.
0QTOCN+PFKECVQT (Normal Indicator = 014/)
Press the 0 key, the ENTER key and then press EXIT (Navigation Keys U UP Arrow) to
exit and return to SETUP MENU #1. Press NEXT (Navigation Keys V Down Arrow) to
proceed to the next display, SETUP MENU #2.
+&5VQTCIG (ID Storage = +&5)
Press the 1 key and then the ENTER key to proceed to the ID Storage Menu. Refer to
the ID STORAGE SETUP, Mode Of Operation = 1 (ID Storage) section of this manual.
&KIKVCN(KNN%VTN (Digital Fill Control = &(%)
Press the 2 key and then the ENTER key to proceed to the Digital Fill Control Menu.
Refer to the 225 Digital Fill Control manual.
2TGUGV9GKIJV%QOR (Preset Weight Comp = 29%)
Press the 3 key and then the ENTER key to proceed to the Preset Weight Comparator
Menu. Refer to the PRESET WEIGHT COMPARATORS SETUP, Mode Of Operation = 3
(Preset Weight Comp) section of this manual.
%JGEM9GKIJGT (Check Weigher = %*9)
Press the 4 key and then the ENTER key to proceed to the Check Weigher Menu. Refer
to the 225 Check Weigher manual.
$CVEJGT (Batcher = $#64)
Press the 5 key and then the ENTER key to proceed to the Batcher Menu. Refer to the
225 Batcher manual.
2CEMCIG9GKIJGT (Package Weigher = 2-9)
Press the 6 key and then the ENTER key to proceed to the Package Weigher Menu.
Refer to the 225 Package Weigher manual.