Specifications

8200-M538-O1 Rev C y 225 Installation & Technical
29
RE-INSTALLING THE REAR PANEL
After all terminations have been made,
1. Remove the excess cable from the instrument enclosure and securely tighten each of
the cable gland connectors.
y Do not over-tighten these connectors but make certain they are snug.
y DO NOT USE TOOLS! Finger-tighten only!
2. Ensure any unused gland connectors are plugged and replace the rear panel.
3. Secure the rear panel with the 14 acorn nuts removed earlier.
4. Follow a diagonal pattern when tightening the acorn nuts.