Specifications

8200-M538-O1 Rev C y 225 Installation & Technical
124
TROUBLESHOOTING, CONT.
*7*!
UNITS key pressed in an attempt to perform a “unit” conversion that is not allowed.
CORRECTIVE ACTION: Determine the reason for the error display and take the
appropriate corrective action.
+&+075'
The operator is attempting to add an ID that already exists.
CORRECTIVE ACTION: Chose another number for the ID.
+&016(170&
The operator is attempting to use an ID that does not exist.
CORRECTIVE ACTION: Determine the reason for the error display and take the
appropriate corrective action.
016#4'
NET key pressed with no stored tare weight value.
CORRECTIVE ACTION: Determine the reason for the error display and take the
appropriate corrective action.
18'4(.19
»»»»»»»
The indicator is attempting to display a positive number greater than seven (7) digits in
length or a negative number of more than six (6) digits.
CORRECTIVE ACTION: Return to Gross Weight mode and review Tare value. May
indicate miscalibration.
611$+)
UNITS key pressed in an attempt to perform a “unit” conversion where the interval would
have been greater than 50.
CORRECTIVE ACTION: Determine the reason for the error display and take the
appropriate corrective action.
6115/#..
UNITS key pressed in an attempt to perform a “unit” conversion where the interval would
have been less than .0001.
CORRECTIVE ACTION: Determine the reason for the error display and take the
appropriate corrective action.