User's Guide
2
Card Access InHome™ Mini Remote User’s Guide
Using Your InHome Mini Remote
Buttons
The Mini Remote can be programmed to execute an event or function by
either pressing the button for less than ½ second or holding the button for
more than ½ second. Your Control4 installer can program different events
for a button press versus a button hold. On a button press, the LED blinks
on then off as you press and release the button. On a button hold, the LED
will turn on and then blink for the duration of the hold. This feature is useful
for functions such as dimming lights and volume control. If the button is
pressed for longer than 30 seconds, the LED will stop blinking as a power-
saving measure.
LED
The default LED color is blue. To customize your LED color, contact your
Control4 installer. This option may be helpful if you have multiple Mini
Remotes in your home or ofce.
The LED will ash to indicate a low battery. When battery power is reduced
to 10% or less, the LED will blink yellow after each button push. When the
battery power is reduced to 5% or less, the LED will blink red after each
button push.
Hold Slide Switch
The Mini Remote uses a slide switch to disable buttons and prevent
accidental button pushes. If you want to disable the buttons while the Mini
Remote is in your purse or pocket, slide the hold switch in (to the right),
Lanyard
Installation Guide
User’s Guide
•
•
•
What is Included
InHome Mini Remote
Two (2) AAA alkaline batteries
Visor clip
•
•
•