Installation Guide

_________________________________________________________________________________________________________________________
Card Access
™
InHome
™
Heavy-Duty Power Controller Installation Guide / Wiring Diagram Page 11 of 12
Card Access, Inc.
Product Registration
Please visit www.cardaccess-inc.com/inhome/registration to register your new product. Along with your contact
information, you must provide the following additional information:
• Product Name (Card Access InHome Heavy-Duty Power Controller)
• Model Number (HPC10A)
• Date of Purchase
• Place of Purchase
• Serial Number (this is the “MAC ID” located on the sticker attached to the radio/logic board inside the Cover Assembly of
either one of the InHome Wireless Contact Switches included in the Package)
Please refer to the One-Year Limited Warranty for complete warranty information.
Regulatory Statements
The Card Access InHome Heavy-Duty Power Controller complies with standards established by the following regulatory
bodies: Federal Communications Commission (FCC), Conformité Européene (CE), and Restriction of Hazardous
Substances (RoHS).
FCC ID: MHIHPC10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT! Changes or modifications not expressly approved by Card Access, Inc. void the user’s authority to operate
the equipment.
CE
We, Card Access, Inc. of 11778 South Election Road, Suite 260, Salt Lake City, Utah, 84020 USA, declare under our sole
responsibility that the Card Access’ InHome Heavy-Duty Controller, Model Number HPC10A, to which this declaration
relates, are in conformity with the following standards and / or other normative documents:
EN60950, EN55022, EN55024
We hereby declare that the above named product is in conformity with the essential requirements and other relevant
provisions of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10(3) and detailed in Annex
II of Directive 1999/5/EC has been followed.
One-Year Limited Warranty
This product is warranted to be free of defects in material and workmanship for one year from date of original purchase from Card Access, Inc. (“Card
Access”).