Datasheet
Carclo Technical Plastics 103 Buckingham Ave, Slough, Berkshire, SL1 4PF ENGLAND
Tel: +44 (0)1753 575011 Fax: +44 (0)1753 811359
Page 1
10.0MM PLAIN SPOT LENS ARRAY
Status Designed
Part no. 10621
Drawing no. 60571
Product type Optic
Type Array
Pieces 1
Diameter 10.0
Height 6.00
Beam Plain Spot lens
Flange Yes
Files Customer drawing
(PDF)
LEDs & Performances Eff. FWHM Cd/lm Spot Cross-section Files
Lumileds Quad Luxeon Rebel Warm White
87.0% 18.8 7.8 10621_Rebel_warm_white_250408.ies
Cree XP-E Quad XLamp® Warm White 87.1% 16.6 10.9 10621_cree_xpe_warm_white_250408.ies
SSC Z5 Quad Cool White 85.4% 16.4 11.9 10621_Seoul_Z5_pure_white_250408.ies
Carclo Technical Plastics endeavours to continuously improve and renew its products; for this reason the technical data and contents of this
catalogue may undergo variations without prior notice. For correct and up to date information, Carclo suggest using the Opticselect tool on our
website http://www.carclo-optics.com.
Copyright © Carclo 2010
General Instruction – Optics & Holders
Handling instructions
●
Do not handle or install lenses without wearing gloves, skin oils may damage the lens or the light transmission.
●
Clean lenses with a mild soap and water and dry with a clean soft cloth.
●
Do not use any commercial solvents on lenses.
●
Mount holders with low Odour epoxies and allow time for them to out gas to stop lenses fogging.
Disclaimer – Optics & Holders
Please note that flow lines, weld lines, surface scratches and small black or white inclusions within the lenses are acceptable if the optical
performance of the lens is within the specification described below:
For all optics except Rippled and Frosted;
●
FWHM = Datasheet Value +/-10%.
For all Rippled and Frosted Optics;
●
FWHM = Datasheet Value +/-20%
For all Optics;
●
Efficiency = Datasheet Value +infinity / -10%
