Specifications

PART NO. QTY DESCRIPTION
060-4200 1 5/16” Male Tube With Locking Quick Connect
060-4300 1 3/8” Male Tube With Locking Quick Connect
061-1550 1 1/2” Open End Hose
062-2040 1 1/2” Male Tube With Locking Quick Connect
062-2066 1 3/8 “ Male Tube With Locking Quick Connect
060-2402 2 14mm x 1.5 Banjo
060-2600 1 16mm x 1.5 Bubble Flare European Vehicles
062-4401 1 3/8” Double Bump - Ford
Part No. 500-1125
The TransTech IV combines both Inline and Dipstick
capabilities allowing for the two most common methods of
ATF exchange from a single machine. With both Inline and
Dipstick services together in one cabinet, the TransTech IV
occupies reduced floor space with minimal investment while
providing service to a wider variety of vehicles.
Inline Exchange – This conventional ATF exchange
method provides an effective transmission flush by
connecting directly to the transmission cooler lines.
New fluid flows through the transmission as old fluid is
directed into the TransTech IV waste tank in a 1 to 1 ratio.
Dipstick Exchange - The TransTech IV features a
convenient Dipstick option that allows an effective ATF exchange
through the transmission dipstick tube. This useful alternative is
suitable when cooler lines are corroded or difficult to access.
• Automatic Inline Exchange - Connect to a transmission
cooler line and press one button. Walk away until the
service is complete.
• Dipstick Exchange - A convenient dipstick tube exchange
requiring no tools or adapters.
• Drain Pan Feature - Allows operator to drain transmission
pan for a convenient and mess-free filter change.
• Transmission Cooler Flush Feature - Allows operator to
flush transmission cooler and cooler lines.
• Patented Level Synchronization - Ensures the transmission
cannot be under or overfilled.
• Automatic Bypass - Ensures that transmission will not run
out of fluid during the exchange process.
• 26 Quart (24.6 L) New Fluid Reservoir - Allows user to
service large capacity transmissions.
• High Volume Pump - For rapid and efficient service.
Specifications
Power Cord 10’ (3 m) Shipping Height 41“ (104 cm)
Power Supply 12 volt DC Shipping Width 24” (61 cm)
New Fluid Capacity 26 Quart (24.6L) Shipping Depth 19” (48 cm)
[e-mail] www.motorvac.com
7
TRANSTECH IV
TransTech IV
Inline & Dipstick Automatic
Transmission Fluid Exchange System
RECOMMENDED CHEMICALS TT2K Part No. 400-0137
PART NO. 200-3100A STANDARD ADAPTERS (INCLUDED) PART NO. 200-3101A DELUXE ADAPTERS (INCLUDED)
PART NO. QTY DESCRIPTION
060-1000 1 1/4” Male Bump Tube - Most Asian Vehicles
060-1100 1 5/16” Male Bump Tube - Most Asian Vehicles
060-1200 1 3/8” Male Bump Tube - Most Asian Vehicles
060-1300 1 1/4“ Open End Hose - Most Asian Vehicles
060-1400 1 5/16” Open End Hose - Most Asian Vehicles
060-1500 1 3/8” Open End Hose - Most Asian Vehicles
060-1700 1 5/16” Flare, 7/16” - 24 - Domestic Vehicles
060-1800 1 3/8” Flare , 5/8” - 20 - Domestic Vehicles
060-3800 1 #5 SAE Flare - European Vehicles
062-0100 1 5/16” Male Flare-Deep Ford Vehicles
062-0120 1 3/8” Male Flare-Deep - Ford Vehicles
062-1034 1 3/8” Female Flare-Deep - Ford Vehicles
200-8099 1 Direction Flow Adapter
200-3102 1 Dipstick Tube Adapter Kit - Set Of 2