Specifications

10
PART NO. QTY DESCRIPTION
063-1030 1 Stepped Hose - 1 1/4” x 1 1/2” OD
063-1031 1 Plug Adapter 1 1/4” x 1 1/2” OD
063-1032 1 Stepped Hose Adapter - 1 3/4” x 2” OD
063-1033 1 Plug Adapter 1 3/4” x 2” OD
080-6005 2 Hose Clamp # 28
010-5408 2 Hose Clamp # 36
060-1400 1 5/16” Open End Adapter
030-4404 1 1/4” x 3/8” Union Step Cone
070-0120 1 3/8” ID x 4” IG Rubber Hose
070-0126 1 1 1/4” ID x 4” IG Rubber Hose
070-0127 1 1 1/2” ID x 4” IG Rubber Hose
070-0128 1 1 3/4” ID x 4” IG Rubber Hose
070-0129 1 2” ID x 4” IG Rubber Hose
Part No. 500-5100
The CoolantClean III exchanges virtually all of the used
coolant mixture in a vehicle’s cooling system in a few
simple steps. The CoolantClean III coolant flush service can
increase a shop’s profits by reducing the time it takes to do a
complete fluid exchange to approximately 15 minutes.
Simply by connecting to the vehicle’s upper radiator hose,
the unit will flush virtually all of the old coolant and replace it
with the new coolant.
• Static or dynamic fluid exchange.
• One switch, multi-function operation with “closed loop”
mode at end of service.
• Unique “vacuum switch” regulates system
depressurization and fluid evacuation.
• Complete flow synchronization maintains a 1-to-1
fluid ratio exchange.
• Front panel controls all machine functions with pressure
gauge and warning lights.
• Industrial grade radiator hoses & adapters included to
service most vehicles.
• Dual pump operation.
• Pressure is limited to 10 psi – if cap malfunctions,
fluid will overflow into reservoir.
CoolantClean III
Premium Coolant Flush System
RECOMMENDED CHEMICALS CC2K Part No. 400-0138
COOLANTCLEAN III
PART NO. 200-3106 STANDARD ADAPTERS (INCLUDED)
Specifications
Power Cord 10’ (3m) Shipping Height 41“ (104 cm)
Power Supply 12 volt DC Shipping Width 24” (61 cm)
New Fluid Capacity 26 Quart (24.6L) Shipping Depth 19” (48 cm)