PRODUCT CATALOGUE MACHINES I CHEMICALS I ADAPTERS LEAK DETECTION SERVICE DISTRIBUTED BY: TOTAL FACILITY SOLUTIONS | 1(800) 274-8730 | WWW.LIFTANDAIRCOMPRESSOR.COM 1324 Blundell Rd. Mississauga ON Tel. 905.615.8620 Fax. 905.615.9745 www.motorvac.
Table of Contents Product Page MACHINES CarbonClean 245 .................................................................................................................................. 1 DieselTune 4000 ................................................................................................................................... 2 CarbonClean Dual ................................................................................................................................
CarbonClean 245 Part No. 500-0245 MotorVac’s two-line cleaning system connects to the engine using vehicle specific adapters, temporarily replacing the vehicle’s fuel system. During the first cleaning phase (with the engine off) the system circulates MotorVac’s powerful yet safe proprietary cleaning MV3 detergent mixed with gasoline through the components of the engine’s fuel system. This phase safely dissolves contaminants, gum and varnish deposits, capturing them in the unit’s ten micron filter.
DieselTune 4000 Complete Diesel System Service DIESELTUNE 4000 Part No. 500-4006 The DieselTune is a 2-line cleaning system that connects to the engine through OEM specific adapters. The IDT 4000 passes a concentrated mixture of MotorVac cleaning detergent and diesel fuel through the components of the fuel system while the engine is running. The system removes organic and inorganic fuel deposits that build up in fuel injectors, injection pumps and combustion chambers.
CarbonClean Dual Part No. 500-0352 The MCS 352 services both gasoline and diesel engines to clean the entire fuel system. When used with fuel system cleaning detergents and the Intake Cleaning Kit, the MCS 352 system cleans the gasoline engine’s air plenum, throttle body, air bypass valve, injectors, valves, combustion chambers, oxygen sensor and catalytic converters without having to remove any engine components.
CarbonClean System II CARBONCLEAN SYSTEM II Carbon Fuel System Service Center Part No. 500-0200 PART NO. 200-8058 STANDARD ADAPTERS (INCLUDED) MotorVac’s two-line cleaning system connects to the engine using vehicle specific adapters, temporarily replacing the vehicle’s fuel system. During the first cleaning phase (with the engine off) the system circulates MotorVac’s powerful yet safe proprietary cleaning MV3 detergent mixed with gasoline through the components of the engine’s fuel system.
Cool Smoke LEAK DETECTION SERVICE EVAP Leak Detection System COOL SMOKE EVAP Part No. 500-0100 STANDARD ADAPTERS (INCLUDED) The Cool Smoke EVAP Leak Detection System quickly locates leaks smaller than 0.010”. Unlike other smoke machines, Cool Smoke uses no heat or electrical energy to generate its high performance ultraviolet enriched vapor. Also, it does not require nitrogen or other inert gases to protect a heating element from contacting evaporated gasoline fumes from the EVAP System.
HD TransTech Transmission Fluid Exchange System for Heavy Duty Applications HD TRANSTECH Specifications Power Supply 12 or 24 volt DC Shipping Height 39.5“ (100 cm) Shipping Width 39” (99 cm) Shipping Depth 20” (51 cm) RECOMMENDED CHEMICALS TT2K Part No. 400-0137 Part No. 500-1150 The HD TransTech is the first machine designed to exchange virtually all of the used transmission fluid in a heavy duty transmission.
TransTech IV Part No. 500-1125 The TransTech IV combines both Inline and Dipstick capabilities allowing for the two most common methods of ATF exchange from a single machine. With both Inline and Dipstick services together in one cabinet, the TransTech IV occupies reduced floor space with minimal investment while providing service to a wider variety of vehicles.
TransTech III Transmission Fluid Exchange System TRANSTECH III Part No. 500-1100 The TransTech III’s advanced electronic interface allows complete, “one touch” control. It even has a quick and easy “Drain Pan” function for spill free transmission filter changes during ATF exchange. The TransTech III connects through transmission cooler lines and provides a clean, environmetally-friendly and systematic approach to servicing automatic transmissions.
TransTech 1000 Part No. 500-1101 The TransTech 1000 performs a fast and effective transmission fluid exchange through the vehicle’s ATF dipstick. TransTech 1000 Transmission Service System can increase a shop’s profits by minimizing the time it takes to perform a fluid exchange in just a few minutes. The TransTech 1000 is easy to use and is compatible with most foreign and domestic vehicles.
CoolantClean III Premium Coolant Flush System COOLANTCLEAN III Part No. 500-5100 The CoolantClean III exchanges virtually all of the used coolant mixture in a vehicle’s cooling system in a few simple steps. The CoolantClean III coolant flush service can increase a shop’s profits by reducing the time it takes to do a complete fluid exchange to approximately 15 minutes.
CoolantClean 1000 Vacuum Coolant Flush The CoolantClean 1000 exchanges coolant directly from the radiator and allows a basic service to be performed in minutes. The machine is easy to use and does not require disconnecting any hoses or time-consuming hook-ups to the cooling system. • Performs a simple and safe coolant exchange service in just minutes. • Easy to use valves for optimal flow control. • Air powered pump will pull 24 inches of vacuum. • Connects through the radiator cap in minutes.
OilClean 1000 Engine Oil Flush System OILCLEAN 1000 Part No. 500-6050 The OilClean system removes sludge and contaminants that can build up throughout the lubrication system over time. The OilClean system uses proprietary detergents to clean and lubricate the oil galleys, valve train, oil pan, timing cover, oil pump and oil screen. • Dynamic flushing process cleans entire lubrication system. • Works with spin-on and canister style oil filter assemblies. Specifications PART NO.
BrakeVac II Premium Brake Fluid Flush System The BrakeVac II brake bleeder machine is a simple, user friendly and efficient way to flush and bleed today’s high tech brake systems. The BrakeVac II reduces the concerns associated with both air pressure and vacuum style brake bleeding. This system can complete a full brake system flush in 10 minutes with only one operator thereby lowering labor costs and maximizing profits. BRAKEVAC II Part No.
CarClean System The Ultimate A/C Ventilation and Interior Sanitizing System CARCLEAN SYSTEM The MotorVac CarClean System treats the problem of mold, mildew and bacteria in a vehicle’s ventilation system and passenger cabin surfaces. The CarClean System is a safe, simple and effective profit generator that targets the health of the driver and occupants, not the vehicle.
CARCLEAN SYSTEM Specifications Power Supply 12 volt DC Shipping Height 13.8“ (35 cm) Shipping Width 8” (20.5 cm) Shipping Depth 5.5” (14 cm) Part No. 500-0500 The MotorVac CarClean System creates nano-droplets which are drawn into the vehicle’s ventilation system treating harmful mold, mildew and bacteria. CarClean treats the entire ventilation system including the evaporator, heater core, air ducts and passenger cabin surfaces.
Fuel Detergents MV3 / MV4 MV3 / MV3D / MV4 Fuel Detergents MV3 / MV4 Fuel injectors, intake valves and combustion chambers are adversely effected by the build up of contaminants. These contaminants can affect drivability and fuel economy. MotorVac CarbonClean detergents loosen and dissolve the carbon, gum and varnish that build up throughout an engine’s fuel system.
TransTech TT2K Over time, heat deteriorates transmission fluid. The fluid oxidizes and forms sludge and varnish that can damage transmission components. MotorVac solutions effectively clean and condition the transmission without the use of harmful alcohols that can damage seals. Step 1 TT1 Automatic Transmission Fluid Cleaner • Gently loosens and removes varnish, sludge and contaminants that build up throughout the transmission system.
SteerClean SCK1000 STEERCLEAN SCK 1000 SteerClean SCK1000 2 Step Kit Power steering fluid degrades as it is exposed to heat. The power steering system can become noisy and stiff while the fluid loses lubricity potentially causing metal to metal wear. SteerClean kits improve the operation of the steering system and extends its life. Step 1 SteerClean Power Steering Flush Detergent • Removes varnish and sludge deposits, to increase fluid circulation and extend component life.
CoolantClean CC2K CoolantClean CC2K 2 Part Service Kits Rust and scale can accumulate in the cooling system of a vehicle. This can impede the flow of coolant and act as an insulator, which can deter the transfer of heat. MotorVac CoolantClean solutions help ensure proper coolant flow by removing the build-up of material that can clog a vehicle’s cooling system and by keeping the system free of rust and scale after a service.
OPTIONAL ADAPTERS 20 OPTIONAL TRANSMISSION ADAPTERS OPTIONAL FUEL ADAPTERS PART NO. DESCRIPTION PART NO. DESCRIPTION 061-0008 45 FLARE M 1/2 #8 060-2300 14mm FEMALE 061-0010 45 FLARE M 5/8 #10 060-2310 Adapter - FEMALE INV FLR M14 X 1.5 061-1008 COUPLER - FLARE F #10 x #8 060-2315 Adapter - MALE BBL FLR M14 X 1.5 062-0140 #6-45 FLARED TUBE W/NUT 060-2320 Adapter - FEMALE OUT FLR F14 X1.5 062-2000 Adapter - TRANS, BMW M12, MALE, O-RING 060-2325 Adapter - MALE INV FLR M14 X1.
WARRANTY STATEMENT Motorvac warrants its products to be free of defects in materials and workmanship for a period of one year. conditions MotorVac, at its sole discretion, will replace or repair any defective item within the warranty period. MotorVac must be contacted in the event of a warranty claim and Motorvac, at its sole discretion, will decide if the item needs to be returned for inspection.
MotorVac is a proud member of the following associations: ZMM11-00328 REV1 1324 Blundell Rd. Mississauga ON Tel. 905.615.8620 Fax. 905.615.9745 www.motorvac.