Technical data

TM 9-1005-319-23&P 0005
0005-21
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
17. BOLT ASSEMBLY FAILS TO LOCK TO REAR AFTER FIRING LAST ROUND.
Step 1. Inspect magazine follower (50) for wear, breaks, or separation from magazine spring (49).
Replace magazine.
Step 2. Determine if magazine spring (49) is weak or broken.
Replace magazine.
Step 3. Inspect magazine feeder lips (48) for bends or breaks.
Replace magazine.
Step 4. Determine if magazine follower (50) binds during operation.
Replace magazine.
1 v s 0 3 1
4 8
4 9
5 0
Figure 29. Magazine Inspection.